skip to content
    Order by Thu, Dec 11 for Christmas deliveryEvery bolo ships gift boxed
    Cord & Clasp Bolo Ties

    BL-01.1 · Field guide

    How a bolo tie works

    Three parts and one job: hold a stone at the collar and let you set the height.

    Cord & Clasp · Updated November 2026 · 4 min read · 3 sources

    Scarlet Ember – Aventurine Bolo Tie, labeled with its parts
    Fig. 1 Anatomy of a bolo tie. Shown: Scarlet Ember – Aventurine Bolo Tie, from the shop.
    1. 01

      Slide

      The stone in its setting, with a clasp on the back that grips both cords.

    2. 02

      Cord

      Braided or rolled leather, threaded through the clasp and free to slide.

    3. 03

      Tips

      Metal ends crimped or glued onto the cord. They weight the ends and stop fraying.

    How it holds

    Drawing from the 1959 bolo slide patent showing the slide gripping both cords
    Fig. 2 The 1959 slide patent: one piece gripping both strands. Read the record

    The clasp on the back of the slide grips both strands of cord with spring or friction. Pull the slide up to tighten it at the collar; slide it down to wear it loose. Nothing ties, which is why a bolo is so quick to put on and so hard to wear wrong.

    What to check on an old bolo

    Most problems are in the cord and tips, not the slide: a cracked or dried cord, a tip that has slipped off, or a clasp that no longer grips. All three can be repaired without touching the stone.

    Sources

    1. US Patent 2,896,217, Slide for a Necktie (1959), Google Patents
    2. Bolo tie, Wikipedia
    3. Arizona state symbols: bola tie